Hi, My 2.8 crd runs well but my heater is not blowing hot air. It has recently had new belts including water pump but getting rid of air locks was a real chore. After a week I checked with the mechanic and he checked circulation and all seamed well. The heater is still only blowing tepid air.Stripped out fascia panels to check actuator units and all seems well. Its about 7 weeks since the full service and I have noticed over the last few days that the coolant system is not pressurising,the top hoses are not overly hot and the bottom hoses are tepid. With this sealed system and no radiator cap I cannot tell if the coolant is circulating properly and if the thermostat is stuck open. Any thoughts would be greatly appreciated.
Question
oldginger
Hi, My 2.8 crd runs well but my heater is not blowing hot air. It has recently had new belts including water pump but getting rid of air locks was a real chore. After a week I checked with the mechanic and he checked circulation and all seamed well. The heater is still only blowing tepid air.Stripped out fascia panels to check actuator units and all seems well. Its about 7 weeks since the full service and I have noticed over the last few days that the coolant system is not pressurising,the top hoses are not overly hot and the bottom hoses are tepid. With this sealed system and no radiator cap I cannot tell if the coolant is circulating properly and if the thermostat is stuck open. Any thoughts would be greatly appreciated.
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.