TJB Posted May 3, 2019 Report Share Posted May 3, 2019 (edited) I just had this pop up in my AutoTrader alerts. It's actually an SR, not an S. OK, it's probably top money but it's a stunning car and ultra low miles. Too good not to share: https://www.autotrader.co.uk/classified/advert/201904307465043?radius=1501&model=DELTA&sort=datedesc&advertising-location=at_cars&make=CHRYSLER&postcode=g840lq&onesearchad=New&onesearchad=Nearly%20New&onesearchad=Used&page=1 I think if I was still searching, I'd consider breaking the bank and travelling south for it. Edited May 3, 2019 by TJB Quote Link to comment Share on other sites More sharing options...
0 TJB Posted September 9, 2019 Author Report Share Posted September 9, 2019 If you can get a decent price on the head rests, let me know. Quote Link to comment Share on other sites More sharing options...
0 Nello Posted September 10, 2019 Report Share Posted September 10, 2019 (edited) If you literally just touch the glass lightly with the unpealed badge it will not adhere fully so you can stand back and move around as desired. As Tim says use the wiper centre to line it up. Its only once you add pressure the adhesive will really stick and bond on to the glass. Edited September 10, 2019 by Nello Quote Link to comment Share on other sites More sharing options...
0 Deltamike Posted September 10, 2019 Report Share Posted September 10, 2019 (edited) Thanks for the kind words all, got out today & did all I could do. Did do the little side badges as well but no photo, I know you all know what they are; but I'm loving the changes. What a car, can't wait for DVLA to get finished and then we're good to go. Registration isn't done yet but this is the reg it will get, one I inherited from my HF4WD. Edited September 10, 2019 by Deltamike TJB 1 Quote Link to comment Share on other sites More sharing options...
0 MikeyRules Posted September 10, 2019 Report Share Posted September 10, 2019 Looking great Mike! Top work and so quickly too! Love the reg... Deltamike 1 Quote Link to comment Share on other sites More sharing options...
0 Andrewgrale Posted September 10, 2019 Report Share Posted September 10, 2019 Mike, what became of your HF4WD???? Quote Link to comment Share on other sites More sharing options...
0 Deltamike Posted September 11, 2019 Report Share Posted September 11, 2019 (edited) I still have it, it's on its original Lancia UK reg now of D200 XPN hence the GAS plate going on the mk3 Here is an original picture from Autocar in 1987 plus a modern snap.It was used with a sister car (D199 XPN) as a journalist demo to show the standard car's prowess at rallying, driven by Jimmy McRae & Mikael Ericsson of Martini Racing. It's in a few magazines of the time hence why I put it back to its original i.d. I haven't rallied it since 2015 as my co-driver quit & I haven't been able to find anyone to replace him! Edited September 11, 2019 by Deltamike Quote Link to comment Share on other sites More sharing options...
0 Nello Posted September 11, 2019 Report Share Posted September 11, 2019 Well done Mike. What are those Sill covers? Don't forget to give me shout if you are ever over to Kenilworth. Quote Link to comment Share on other sites More sharing options...
0 Deltamike Posted September 11, 2019 Report Share Posted September 11, 2019 Well done Mike. What are those Sill covers? Don't forget to give me shout if you are ever over to Kenilworth. It's a set of Lancia ones, I found one front & one rear of opposite sides on ebay & Alfashop got the other 2. Will do, think we may be over around half term in October. Nello and TJB 2 Quote Link to comment Share on other sites More sharing options...
0 Nello Posted September 12, 2019 Report Share Posted September 12, 2019 Nice one - were they just stick-on? Quote Link to comment Share on other sites More sharing options...
0 Deltamike Posted September 12, 2019 Report Share Posted September 12, 2019 Nice one - were they just stick-on?Yes, just prised the Chrysler ones out after warming them up a bit & these went straight in in their place. Nello and TJB 2 Quote Link to comment Share on other sites More sharing options...
0 TJB Posted September 14, 2019 Author Report Share Posted September 14, 2019 It's a set of Lancia ones, I found one front & one rear of opposite sides on ebay & Alfashop got the other 2. Will do, think we may be over around half term in October. Like the look of the sill plates. I was contemplating a set of these: Factory ones would be a lot nicer. What was the damage, if you don't mind me asking? Quote Link to comment Share on other sites More sharing options...
0 Deltamike Posted September 15, 2019 Report Share Posted September 15, 2019 I was thinking of those as well originally but I do prefer the original ones. I also thought about just doing the fronts as they're the ones with the Chrysler logo, however I knew if I didn't do the rears as well it would bug me in the end! I paid £35 for each front & £20 for each rear, though as said they were from 2 different sources. TJB 1 Quote Link to comment Share on other sites More sharing options...
0 TJB Posted September 16, 2019 Author Report Share Posted September 16, 2019 I was thinking of those as well originally but I do prefer the original ones. I also thought about just doing the fronts as they're the ones with the Chrysler logo, however I knew if I didn't do the rears as well it would bug me in the end! I paid £35 for each front & £20 for each rear, though as said they were from 2 different sources.Thanks Mike, I may keep an eye out in Italian eBay for them once I've recovered from the MOT bill for my other car. Quote Link to comment Share on other sites More sharing options...
0 Andrewgrale Posted September 16, 2019 Report Share Posted September 16, 2019 Thanks Mike, I may keep an eye out in Italian eBay for them once I've recovered from the MOT bill for my other car. Obviously not an Italian so :-D Quote Link to comment Share on other sites More sharing options...
0 TJB Posted September 16, 2019 Author Report Share Posted September 16, 2019 Obviously not an Italian so :-D No, but voted the most beautiful saloon car in the world - by the Italians Quote Link to comment Share on other sites More sharing options...
0 alfaspud Posted September 17, 2019 Report Share Posted September 17, 2019 the 166 is the best looking saloon car in the world - they mustn't have been sold in Italy I guess Quote Link to comment Share on other sites More sharing options...
0 MikeyRules Posted September 17, 2019 Report Share Posted September 17, 2019 Nearly bought a ZTT once. I guess Rover/MG fit with my liking the left field choice... As for the 166 Spud ?... The interiors are more Maser than Alfa. Has to be a facelift though as the pre's are feckin ugly! Quote Link to comment Share on other sites More sharing options...
0 Nello Posted September 17, 2019 Report Share Posted September 17, 2019 (edited) My Mum's partner has had quite a few 75's - they are flippin' heavy! ...... Comfy and quite spacious though. And I used to live next door to someone who was high up within the Rover Group who had at one point the 4.6 ZT V8...... Sounded ace! My next four-door has to be a Ghibli Edited September 17, 2019 by Nello TJB 1 Quote Link to comment Share on other sites More sharing options...
0 TJB Posted September 17, 2019 Author Report Share Posted September 17, 2019 My Mum's partner has had quite a few 75's - they are flippin' heavy! ...... Comfy and quite spacious though. And I used to live next door to someone who was high up within the Rover Group who had at one point the 4.6 ZT V8...... Sounded ace! My next four-door has to be a Ghibli With you on the Ghibli Neil, its a lovely thing. I've had 4 75s and a ZT since 2003, I had 200s, 400s and 800s prior to that for 20 odd years. This one is a very early Japanese spec, 2.5 V6 with pretty much every option available at launch, including Personal Line leather and Heritage Collection paint. I've been a Britcar guy pretty much all my life. However I have to say the Delta is probably the first car I've really bonded with and want to keep since I first got in to a 75. Nello 1 Quote Link to comment Share on other sites More sharing options...
0 Deltamike Posted October 20, 2019 Report Share Posted October 20, 2019 (edited) Got home from the rig and the nice people at Swansea have written to me. So right now I am the proud first ever owner of AP12 VXC! Weirdly the V5 says 'first used elsewhere in the UK', which - if you've been following this - we know is B-S & is what caused all the faffing about in the first place; Guernsey isn't in the UK or EU. Never mind, tomorrow will transfer the GAS plate over & that is finally that! Edited October 20, 2019 by Deltamike Cassino, TJB and Nello 3 Quote Link to comment Share on other sites More sharing options...
0 Andrewgrale Posted October 20, 2019 Report Share Posted October 20, 2019 Got home from the rig and the nice people at Swansea have written to me. So right now I am the proud first ever owner of AP12 VXC! Weirdly the V5 says 'first used elsewhere in the UK', which - if you've been following this - we know is B-S & is what caused all the faffing about in the first place; Guernsey isn't in the UK or EU. Never mind, tomorrow will transfer the GAS plate over & that is finally that!Well done Mike!!!Everything comes to he who waits Deltamike and Nello 2 Quote Link to comment Share on other sites More sharing options...
0 Deltamike Posted November 5, 2019 Report Share Posted November 5, 2019 Well 16k no more Quote Link to comment Share on other sites More sharing options...
0 MikeyRules Posted November 5, 2019 Report Share Posted November 5, 2019 Well 16k no more http://cdn.chryslerforum.co.uk/public/style_images/defraction/attachicon.gifIMG_1023.JPGIt's still running in! Deltamike 1 Quote Link to comment Share on other sites More sharing options...
0 Nello Posted November 5, 2019 Report Share Posted November 5, 2019 Defo - I'm on 74K now! Quote Link to comment Share on other sites More sharing options...
0 TJB Posted November 6, 2019 Author Report Share Posted November 6, 2019 Defo - I'm on 74K now! Mine rolled through 60k recently. Can't believe that's a year and 12000 miles now. Quote Link to comment Share on other sites More sharing options...
Question
TJB
I just had this pop up in my AutoTrader alerts. It's actually an SR, not an S. OK, it's probably top money but it's a stunning car and ultra low miles. Too good not to share:
https://www.autotrader.co.uk/classified/advert/201904307465043?radius=1501&model=DELTA&sort=datedesc&advertising-location=at_cars&make=CHRYSLER&postcode=g840lq&onesearchad=New&onesearchad=Nearly%20New&onesearchad=Used&page=1
I think if I was still searching, I'd consider breaking the bank and travelling south for it.
Edited by TJBLink to comment
Share on other sites
Top Posters For This Question
14
7
10
23
Popular Days
May 7
5
May 8
5
Sep 9
5
Sep 17
4
Top Posters For This Question
Nello 14 posts
MikeyRules 7 posts
TJB 10 posts
Deltamike 23 posts
Popular Days
May 7 2019
5 posts
May 8 2019
5 posts
Sep 9 2019
5 posts
Sep 17 2019
4 posts
Popular Posts
Deltamike
Hi, hopefully this car is going to be mine! The low mileage is due to it being a Guernsey car, so low miles but perhaps a bit more clutch abuse. I've put a deposit on it, just waiting now for the de
Deltamike
Got home from the rig and the nice people at Swansea have written to me. So right now I am the proud first ever owner of AP12 VXC! Weirdly the V5 says 'first used elsewhere in the UK', which - if y
Deltamike
Well 2 bits of good news today, MoT passed with no advisories and Fiat have said they've sent the EU conformity certificate today free of charge. The website says they're £120 but I'll not argue the
Posted Images
61 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.