Workshop Manual

[AndrewSpa]

I am looking for a workshop manual for my 2010 Chrysler Grand Voyager 2.8 CRD. (5th Gen)

I need to replace the front aircon evaporator. I do not want to damage the dashboard , so I would like to strip according to the manual.

 

Also the car vibrates at idle. All four engine and gearbox mountings were broken , so I replaced them with polyurethane mountings and the car is better , but still vibrates. I suspect the mountings may be too hard , but the car idles at around 700 rpm and if I pick the revs up to 950-ish rpm it stabilizes.

 

The fuel pressure regulator is also apparently faulty. I have just bought one and I am wondering if that isn't why the idling seems low.

 

Workshop manual will be greatly appreciated. 

 

Thank you in advance

[karmannski]

look on ebay there was a manual dvd version for few quid. 

[AndrewSpa]

Thanks , I am busy doing that.

I wanted to buy a few months ago and was warned by several people that these digital download manuals are scams, so I am a bit weary. 

I have been dumb enough to get caught once or twice before.

[CoxynotKirsty]

Full workshop manual for 2009 available on a Mk5 facebook group. It's in the files section.