mikebh8 Posted January 22, 2018 Report Share Posted January 22, 2018 (edited) Hi, I am using a program (some probably know it) and for those that don't know it I would like to share it with you. All the files needed for the installation are in the folder attached to the below link.On youtube you will find videos on how to install. Enjoy. https://www.dropbox.com/sh/rbw862uakm1dhkl/AAAmsqoVtS7o7dFb8BH9xVWXa?dl=0 I am newish to dropbox sharing so if it doesn't work let me know and I'll fix it.Attached is a snapshot with a list of what it should be in the folder. @@andyb2000 remember I told you about more software, try this one. Edited January 22, 2018 by mikebh8 andyb2000 1 Quote Link to comment Share on other sites More sharing options...
0 andyb2000 Posted January 23, 2018 Report Share Posted January 23, 2018 Spot on Mike, handy that, good reference for a lot of faults and info. Just one downside, no P1 fault codes in there, but that's only a minor thing. I've already looked up sensors, testing and their guide ohm or voltage values, which is invaluable for testing sensors. I found the getuid files missing, so grabbed them elsewhere and I've attached here just in case anyone else has problems. getuid.zip bignev 1 Quote Link to comment Share on other sites More sharing options...
0 mikebh8 Posted January 23, 2018 Author Report Share Posted January 23, 2018 Welcome, I'm not sure which files are usually deleted when the software is downloaded...I forgot to mention that the antivirus and firewall should be off otherwise will send some of the files into quarantine. Every time a P1 code comes up it says manufacturer specification, I never looked into it, if I come across an updates I'll add them. P.S. that is most up to date version of it, I used to use 3.38. Enjoy Quote Link to comment Share on other sites More sharing options...
0 QinteQ Posted January 23, 2018 Report Share Posted January 23, 2018 P & U are crucial they are U = CAN + VAN + DATA BUS etc similarly the P=CAM+FUEL+SEATS+MAF etc Quote Link to comment Share on other sites More sharing options...
0 QinteQ Posted January 23, 2018 Report Share Posted January 23, 2018 Hi, I am using a program (some probably know it) and for those that don't know it I would like to share it with you. All the files needed for the installation are in the folder attached to the below link.On youtube you will find videos on how to install. Enjoy. https://www.dropbox.com/sh/rbw862uakm1dhkl/AAAmsqoVtS7o7dFb8BH9xVWXa?dl=0 I am newish to dropbox sharing so if it doesn't work let me know and I'll fix it.Attached is a snapshot with a list of what it should be in the folder. @@andyb2000 remember I told you about more software, try this one. Voyager CRD IV gen wiring diagrams in that ver MikeBH ? Quote Link to comment Share on other sites More sharing options...
0 mikebh8 Posted January 23, 2018 Author Report Share Posted January 23, 2018 yes it has,I took a screenshot of the 2.8 crd.that's what it comes up, if the mouse is moved over the diagram, on the right hand side it enlarges.And more, a lot more. Quote Link to comment Share on other sites More sharing options...
0 mikebh8 Posted January 23, 2018 Author Report Share Posted January 23, 2018 (edited) I managed to make a short video to show what the software is about.It can be seen at the following link: https://youtu.be/vSTSrzcjOVU It is not the best quality as my usual screen capture software is down and I just downloaded a random one which is not great, future videos ( if needed) will be improved. There was a problem with uploading it, no it's working. Edited January 24, 2018 by mikebh8 QinteQ 1 Quote Link to comment Share on other sites More sharing options...
Question
mikebh8
Hi, I am using a program (some probably know it) and for those that don't know it I would like to share it with you.
All the files needed for the installation are in the folder attached to the below link.
On youtube you will find videos on how to install. Enjoy.
https://www.dropbox.com/sh/rbw862uakm1dhkl/AAAmsqoVtS7o7dFb8BH9xVWXa?dl=0
I am newish to dropbox sharing so if it doesn't work let me know and I'll fix it.
Attached is a snapshot with a list of what it should be in the folder.
@@andyb2000 remember I told you about more software, try this one.
Edited by mikebh8Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.