Dipped Head Lights Issue On Chrysler 300C

[Madmel55]

Hi I have a problem with my dipped HID beam (both sides) on my Chrysler 300c in that they start in the normal position then in about 2 to 10 minutes they drop very low. I have changed the bulbs, Ballasts, HID controller, has anybody got any other suggestions as to what could be causing this please.

 

Madmel55

[mikebh8]

When you say they drop, what do you mean?

In intensity or angle with the road( motor)?

Thanks.

[Madmel55]

@@mikebh8

 Hi Angle on the road is the issue, they start normal height then within 5 minutes both beams drop. Any ideas please? 

[mikebh8]

...only assumtions:

Because they both do it, it is not at the end of the circuit, ie motors.

I bet they come with self levelling (or auto levelling).

I would look for the module that controls that, has nothing to do with the ballast and/or lamps, it is a module that I assume it works with mercury and so when you have full car (passengers and stuff in the boot) it will drop the angle down to a certain degree so the lights won't affect the incoming drivers.

I personally don't have one and not familiar with the model (even though I wish I buy one...is just never the right time) but follow this lnik and see if you get it.

You will have two sensors that will send info to a module, one of the three is faulty.

 

 

http://www.300cforums.com/forums/uk-europe-regional-forum/115273-hid-auto-leveling-module-question.html#/topics/115273

 

Hope it helps.