Dido Posted September 7, 2017 Report Share Posted September 7, 2017 Any idea where would be the information regarding tyre pressure. It should be on the panel of front door but my panels beard no information. I have the 17 inch tyres.... Any recommendations...? Quote Link to comment Share on other sites More sharing options...
0 mikebh8 Posted September 7, 2017 Report Share Posted September 7, 2017 Hi, after checking the autodata that I have, no 17in tyres came out for grand voyager... I wonder if they came from a different model. I used to have 18in FROM A 300C.However, all the other models and years show the tyre pressure as 2.5bar or 36psi ( except the 18in from 300c hemi which is 4.2bar).A Canadian( doesn't matter mach where he's from, but he always drove american cars...that doesn't matter either) once told me that putting 40psi in all the tyres it should do, since than I always do it and never had problems. Hope it helps. Quote Link to comment Share on other sites More sharing options...
0 Andrewgrale Posted September 7, 2017 Report Share Posted September 7, 2017 Any idea where would be the information regarding tyre pressure. It should be on the panel of front door but my panels beard no information. I have the 17 inch tyres.... Any recommendations...?Should be in the handbook! Possibly on the passenger front door striker plate side? For 17 inch wheels, I would be going with 34psi (2.4bar) front and 32psi (2.2bar) rear Quote Link to comment Share on other sites More sharing options...
0 mikebh8 Posted September 7, 2017 Report Share Posted September 7, 2017 Please see the link attached.Take is a guide and not for granted. www.puretyre.co.uk/tyre-information/tyre-pressures/chrysler-tyre-pressures/ Quote Link to comment Share on other sites More sharing options...
0 Dido Posted September 9, 2017 Author Report Share Posted September 9, 2017 Hi, after checking the autodata that I have, no 17in tyres came out for grand voyager... I wonder if they came from a different model. I used to have 18in FROM A 300C.However, all the other models and years show the tyre pressure as 2.5bar or 36psi ( except the 18in from 300c hemi which is 4.2bar).A Canadian( doesn't matter mach where he's from, but he always drove american cars...that doesn't matter either) once told me that putting 40psi in all the tyres it should do, since than I always do it and never had problems. Hope it helps. Quote Link to comment Share on other sites More sharing options...
0 Dido Posted September 9, 2017 Author Report Share Posted September 9, 2017 But what has all this to do with the Delta, it is not a Chrysler and definitely not American. It is an Italian Lancia in borrowed robes.... Quote Link to comment Share on other sites More sharing options...
0 Andrewgrale Posted September 9, 2017 Report Share Posted September 9, 2017 (edited) But what has all this to do with the Delta, it is not a Chrysler and definitely not American. It is an Italian Lancia in borrowed robes....Mike was simply pointing out a maxim that a friend of his uses for tyre pressuresThat his friend is Canadian and drives American cars, was incidental!And I think Mike got confused with the model he was checking tyre pressure for, it doesn't matter, the information is still relevant Edited September 9, 2017 by Andrewgrale Quote Link to comment Share on other sites More sharing options...
0 Dido Posted September 9, 2017 Author Report Share Posted September 9, 2017 Many thanks mates,I Think I would go for 2.4 and 2.2 Front and rear. By and by, any believers in Nitrogen as opposed to air for a beter economy. Quote Link to comment Share on other sites More sharing options...
0 Rossocorsa Posted September 9, 2017 Report Share Posted September 9, 2017 I think the only people who believe in that are dodgy garages who want a bit of extra profit from nothing! Quote Link to comment Share on other sites More sharing options...
0 Andrewgrale Posted September 9, 2017 Report Share Posted September 9, 2017 By and by, any believers in Nitrogen as opposed to air for a beter economy.Ordinary air is 80% nitrogen Quote Link to comment Share on other sites More sharing options...
0 Dido Posted September 9, 2017 Author Report Share Posted September 9, 2017 Totally agree... Nitrogen won't make a difference. By and by, I got my Delta a pair of Primacy 3 Michealan tyres to replace the rather worn out front pair, I got a good deal at the local costco. I think that is in tune with the ones she originally came with (older version primacy). I have another note regarding tyre noise on the road (mine are the 17 inch). It is rather noisy on the road compared to my wife's French 7 seater MPV. Any body shares the same experience, or is it the lower sit and wider tyres? I may even start a thread on that.. Quote Link to comment Share on other sites More sharing options...
0 Dido Posted September 9, 2017 Author Report Share Posted September 9, 2017 Totally agree... Nitrogen won't make a difference. By and by, I got my Delta a pair of Primacy 3 Michealan tyres to replace the rather worn out front pair, I got a good deal at the local costco. I think that is in tune with the ones she originally came with (older version primacy). I have another note regarding tyre noise on the road (mine are the 17 inch). It is rather noisy on the road compared to my wife's French 7 seater MPV. Any body shares the same experience, or is it the lower sit and wider tyres? I may even start a thread on that.. Quote Link to comment Share on other sites More sharing options...
0 mikebh8 Posted September 10, 2017 Report Share Posted September 10, 2017 I do have to say, I was checking the wrong model, however (@@Andrewgrale cheers for defending the point), the same rule I use/used for Renault Clio, Citroen berlingo, Peugeot 307, ford transit, Renault Laguna, Mitsubishi fto and L200 and other cars that I had(some I still have) and always run great with less weariness on the sides. Plus with 2.2 at at the back is when the car is empty, if you want to take passengers at full capacity, you have to pump air at the required pressure, and soon as the passengers left the car, you have to release the right pressure out( at least this what the manual suggests), I wonder who really does tat on a daily basis?!?! yeah the guy's nationality and taste for cars are irrelevant but was the same guy that told me about the used cooking oil running the diesel engines( not all but most of them), so I gave him credit being older than me and having more experience. Anyway, glad is sorted. Quote Link to comment Share on other sites More sharing options...
0 mikebh8 Posted September 10, 2017 Report Share Posted September 10, 2017 But what has all this to do with the Delta, it is not a Chrysler and definitely not American. It is an Italian Lancia in borrowed robes....My apologies, I got the wrong model, however in these days the "Lancia" you used to know became part of the "Fiat Chrysler Automobiles" in 2015, and Chrysler is owned by Chevrolet, and Chevrolet is owned by GMC....a big happy family. Quote Link to comment Share on other sites More sharing options...
0 mikebh8 Posted September 13, 2017 Report Share Posted September 13, 2017 If you still want the exact pressure...I just installed a new version of autodata..See attached. Quote Link to comment Share on other sites More sharing options...
Question
Dido
Any idea where would be the information regarding tyre pressure. It should be on the panel of front door but my panels beard no information.
I have the 17 inch tyres....
Any recommendations...?
Link to comment
Share on other sites
14 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.