Jump to content

BumBle02

Members
  • Posts

    162
  • Joined

  • Last visited

  • Days Won

    17

Everything posted by BumBle02

  1. Hi Big daddy No this one as one in o/s rear side getting the lot out next week new speakers all around 6x9 x4 5.25x2 amp under seat small sub as well metre 70-6504 amp bypass lead Kenwood dab radio when finished it better sound good on a CGV 2007 with the can bus setup.
  2. Yes got a Kenwood it works well not over the top.
  3. Look under after market radio setup.
  4. Well the Varta F18 battery did not fit in my CGV 2.8 crd 2007 I had to mod the battery by cutting the fitting lugs off the to ends of the battery. All so take the protecting cover of the ECU the one in front of the battery and resealing it from water and it went in wow did not expect that.
  5. Yes I'm going to do nine every second oil change I've got a 2007 it as one filter in the engine bay
  6. yes I bet its the camber setting is out and it is important to put the spring assemblies back the same way they came off as I found out.
  7. Thanks Andy are the speakers all 6x9 size got to Kenwoods 6x9 if door speakers are 6x9 I will have to buy to more once finished and amp in etc speakers should be the same as yours I let all know good luck. Jeff
  8. Hi To all are the speakers in a CGV 2007 I think Andy will know this one waiting for parts to take out the amp and radio so I know all the speakers in the back are 6x9 but are the door ones the same thanks.
  9. Hi Yes get the code checked put the code number on here and some one will till you what it is.
  10. To Me it sounds like top mounts bearings mot guy may have lifted up the front and unsettle them or wheel bearing.
  11. I would put a new sensor in it and at least you have eliminate it these sensors do play up good luck with it.
  12. Hi Try taking the battery terminal off sometimes it works by reseting the computer a guy on youtube had similar problem he disconnected the radio data cable make sure you have radio code.
  13. Yes thanks now I know which ones to get good luck Bumble
  14. Thanks you that Fbson did you notice whether the nozzles were push in or screw thread mine has been poked with a screwdriver need some new ones good luck. Bumble
  15. Hi Got a Front washer jet totally blocked to remove do you have to remove the top panel or is a squeeze the side job on my 2007 CGV thanks. Bumble
  16. Hi It might be helpful if we knew whether it was diesel of petrol and year.
  17. Thanks you that I send him a line it must have a pin somewhere it looks like he's pushing something down putting the .new stereo in tomorrow give the box a go again done little push in catchers in top corners of box.
  18. Thanks soapstone tried that just hits the stop tried lifting pushing I must be missing something must be a catch somewhere oh well keep trying.
  19. Hi To all anybody know how to remove the storage box under passenger seat going to put a small sub in thanks.
  20. My wife's little Nissan had the same thing I put a can of ZX1 Lub in the oil and helped a lot it's on eBay I think you will need two cans. Bumble
  21. Just at look at mine and I do not have a MBS relay I may not have a amp after all and this a 2007 with no dvd radio cd only will let you know in the end.
  22. Thanks Andy I Just knew you been here before I thought if anybody as done it would be you big thanks mate. Jeff
  23. Well everybody found a easy solution take the blue radio antenna wire in to the engine department to the fuse box in side you will find a relay it's the one nearest to the head light wing side connect wire to pin 87 that will turn on the amp when you switch on the radio alternately you could put a accessory live wire in fuse box to 87 so it will activate it save running a wire though bulkhead. Bumble
  24. Hi To all got a good Kenwood unit with the 500I iPod unit I've bought a converter with the connections to fit my 2007 I've got a standard radio with the single cd don't know if a amplifier is fitted in there. Are they easy to convert over thanks.
×
×
  • Create New...