Jump to content

BigDaddy

Members
  • Posts

    30
  • Joined

  • Last visited

About BigDaddy

  • Birthday 10/05/1979

Profile Information

  • Gender
    Male
  • Location
    Southampton

BigDaddy's Achievements

  1. I was looking for new glow plugs and there are 11v and 5v. How to check which ones are for my V?
  2. It might be I don't know I just noticed that hissing sound. It spouts to do that? Maybe this have nothing to do with my problem? https://youtu.be/RE20Wtqm2LA
  3. The coil melted making lots of smoke and starded to make loud squeaking noise.
  4. Hi guys. My aircon cluch/pulley is gone I take the accessory belt off and if I can drive like this. Of course i won't have charging without belt. But if i drive it won't damage the engine?
  5. Hi guys. Can someone remind me with direction thay going back as I took mine a while ago and I don't remember how thay where ? Thin or thick side forward etc.
  6. The alternator was gone, and until battery was completely dead nothing came out on dashboard no warning. It's strange that battery light didn't pops out earlier
  7. Sorry if I done something wrong I'm on hard shoulder with kids
  8. Died and don't want to start on motorway. Before battery ikon and abs pops out on dashboard and disengage gear on neutral in automatic gearbox. Now it looks like no power from battery and don't want to start. Any suggestions?
  9. I wanted to instal Rb3 with satnav from other gv instead of my RB1 but it doesn't work and I don't have a relay. It just frustrating that even different original radio won't work
  10. I wanted to instal Rb3 with satnav from other gv instead of my RB1 but it doesn't work and I don't have a relay. It just frustrating that even different original radio won't work
  11. I looked on that post but I'm fitting Chrysler gv radio from other car and unfortunately I don't have blue wire nor relay. I could use other relay and check but what other wire apart blue antenna one I can use?
  12. Hi. I recently bought RB3 radio with sat nav ( Becker BE6802 ) i plugged it in, type in the code and sound doesn't work. Do the radio sill have to be coded to the car? When I fit my old radio everything is ok. I read about that problem on the other website but no one find a solution https://www.chryslerforum.com/forum/chrysler-voyager-town-country-21/rb3-satnav-no-sound-17065/
×
×
  • Create New...