Clint221

That number I posted last was the genuine Chrysler part number.

I got it through a main dealer here in the N.I and from memory it was only about £70.

Sorted... cheers.

Thanks... it doesn't show me what the rear hook on the clockspring is attached to though, as mine isn't attached or hooked onto anything atm.

Would anyone have access to a diagram or photograph showing where the clockspring clutch actual spring attaches in the handbrake mechanism.. the hooked end of the spring isn't attached anywhere at the moment.

I've also found the possible reason for the cable failure to start with.... the rear mechanisms were seized solid, so some was definitely over compensating with excess force.

2006 Chrysler Voyager CRD SE, Diesel, Manual, 7 Seater. 2 Sliding side doors. 2,500cc Turbo Diesel, 5 speed manual, 130k miles. Mot'd December 2017. Lots of new parts, recent new clutch kit, new battery, new heater plugs, new brake shoes and pads, 4 new tyres. Car runs perfect and is in very good condition. Great spacious family 7 seater, privacy glass, electric windows etc. Ready for winter. Only selling as I've bought a Stow and Go Grand Voyager. Will consider Part Ex for Motorbike or Large Scooter. £1500 CASH ovno, as the car is no longer needed. **Car is in N Ireland. 07516-141988 or Email [email protected]

I found out the reason for the wrong cable..... the cable for the Stow and Go Grand Voyager -2006 (04721246AC) is about 700mm longer than the normal seated version. Hope this help clear up any further confusion

The cable I need is from the handbrake itself to the link joining both left and right rears. The inner cable on the one I have at present is about 1900mm but apparently both inner and outer are too short by about 50mm.

I bought the car with the cable already removed, not sure of the reason tbh.... The cable I got through the main dealer with the cars chassis number is too short to reach where it has to go, I've reordered another one in case this was one was sent in error. Is there a central cable between the first cable and both rears?

Hi, I am having problems sourcing the front handbrake cable which attaches to the handbrake lever itself. I ordered on via the main dealer but it is way too short and they say it's the one listed for the car. Anyone know where I would get one or have a similar problem? Thanks.