Leaderboard

Try the connector to the off side sensor, it's the most exposed and can get corroded. Easy to reach via the wheel arch

Hic Burp niceee brew...Ahhhhh worst bit now after cleaning up top hat rear discs. Discs, shoes and pads were ok even though I got new ones. Adjusting these rear shoes so Handbrick works before MOT on Thursday coming.... Now I've studied the handbrake screw adjusters and how they work and its a limp wrist movement with screwdriver in the hole of the back plate to take up slack. Then check if handbrake works and how well... And no its not adjusted equal sides as I've found, offside with its longer brake cables has to come on first to make it work... Handbrake cables at mo loose as loose as I've got my 4mm drill in hold back slots... I deserve more beer for this dilemma....

Zero start or no attempt to engage bendix ? No electrical activity at all is usually trigger wire. http://my.prostreetonline.com/wp-content/uploads/2014/10/starter_solenoid1.jpg

The Polish Club sites always worked for me - though better OOH when its quieter so it does not drop............. http://eper.fiatklubpolska.pl/navi?FORCED=TRUE Just make sure you amend the LANGUAGE=6 to =3 otherwise it'll all be double-dutch......... (OK Polish/Slavic!)